You get large capsules (size 000, 2 cm) and a dropper to activate the capsules to ignite a fire. These will ignite by it self with just 2 - 5 drops from the dropper. You can also add a couple drops of anti-freeze, brake fluid or glycerine. It can get up to 5,000 °F and will last for 30 seconds to get your fire started. If you mix it with sugar and water, it will get up to 170 °F and will sometimes ignite.
This brilliant invention has the power to light up 15,000 times. Simply pull the metal wonder from the stainless steel case, strike it on the side, and presto...its lit! Operates with lighter fluid. (not included)
Easily get your fire started with a small vial of Mega-X. Just use the Spark-Lite Tinder-Quik Fire that is included in the vial. Will burn for up to 2 minutes at 5,000 °F to give you plenty of time and heat to get that fire started. Works even when wet.
You will receive the following:
2 inch fuse gives 4-5 second delay after lighting or you can just pour out the vial and will ignite in around 30 seconds. Just place in the AntiThermite-X, light the fuse or pour out the vial, and step far away. Will reach up to 4,500 °F for about 2 minutes. Great for those hard to start fires and/or wet wood. The most powerful, easiest way to get a fire started.
Shipped double-bagged in resealable bags
Thermite can reach up to 4,500 °F
2 inch fuse gives 4-5 second delay after lighting. The easiest way to light thermite. Just place in the thermite, light the fuse, and step far away. This can be lit with a regular lighter so there is no need for a blowtorch. This will replace magnesium as the fuse for thermite.
Just mix thoroughly and it's ready to light. Be VERY careful when handling and lighting.
Shipping is expensive if only buying 1 fire starter. Order larger quantities greatly reduce the cost of shipping.
This is a must have for any survivalist or camper who needs a sure way to start a fire. Just place in the thermite fire starter on your kindling, light the fuse, and step back. This can be lit with a regular lighter or match. Store in a cool dry place away from heat sources or sparks.
These new emergency fire starters are designed for extreme situations, such as deep snow or heavy wet rainy conditions. Match or lighter ignited. Safe and the most effective fire starter ever created. During survival situation the ability to construct a fire can make the difference between living and dying. The ability to start a fire is the number one survival skill you can have, without which you will likely be in serious trouble during an emergency survival or disaster situation. None of the current available fire starters on the market work in deep snow or extreme wet conditions were you would need them most. The ability to start an emergency fire is a true test for any seasoned camper. In survival situations, this skill is even more critical. Rarely is a fire started by simply putting a flaming match to wood. Rainy weather, green wood, blustering wind and bitter cold can make starting a fire and keeping it lit challenging. When you want a good fire and you want it now, thermite fire starters can be your salvation. Even under the most adverse outdoor conditions, pouring rain or 3 feet of snow on soaking wet hardwood is no match for thermite. One match and you have 4,500 °F of melted iron. Each 3 ounce thermite fire starter burns for about 20 seconds leaving behind 2.7 ounces white hot 4,500 °F melted iron that remains white hot for minuets after and remains red hot long after that to get even the wettest wood burning.
These are little solid fuel tabs (Hexamine) that fit into any survival kit, and burn for 9 minutes straight. For use in solid fuel stoves and as fire and barbecue starters. These tablets are made of Hexamine, a safe clean burning fuel which is easy to ignite, smokeless, odorless and non-poisonous. One tablet will burn 9 minutes. Burning multiple tablets will increase the heat and decrease cooking time and/or counter the effects of wind.
The TEC-S3 Glow Fob is a unique glow-in-the-dark (GITD) keychain fob unlike any you have ever seen. The internal glow pellet consists of a clear acrylic tube filled with a special glow powder and resin mixture. The pellet is mounted inside a protective stainless steel housing with a uniform bead blasted matte finish.
When exposed to light, it will glow for hours...the longer the exposure time and the higher the light intensity, the longer and brighter it will glow. Glow times can last as long as 12 hours!
Attach the TEC-S3 to your car keys or even a flashlight, so you can always find them when the lights go out. Attach it to your jacket as a zipper pull so your friends can locate you inside a movie theater or outside at night! You can clip it to a backpack, camping gear, or even to the pull chain on a ceiling fan...the uses are endless!
The TEC-A3 Glow Fob is a unique glow-in-the-dark (GITD) keychain fob unlike any you have ever seen. The internal glow pellet consists of a clear acrylic tube filled with a special glow powder and resin mixture. The pellet is mounted inside a protective aluminum housing with a durable Type III hard anodize finish.
Attach the TEC-A3 to your car keys or even a flashlight, so you can always find them when the lights go out. Attach it to your jacket as a zipper pull so your friends can locate you inside a movie theater or outside at night! You can clip it to a backpack, camping gear, or even to the pull chain on a ceiling fan...the uses are endless!
M-Tech Xtreme Tactical Fighting Knife. 6MM All Black 440 Stainless Steel Saw Back Tanto Blade. VERY SHARP BLADE. G-10 Handle with Finger Grips. Heavy Duty Nylon Carrying Case with Lanyard. 11" Overall
This fixed blade knife is constructed with an 5.25 Inch Overall blade with 6MM blade thickness. The blade also features Half serrated 440 stainless steel. Includes hard nylon sheath with an adjustable nylon belt leg strap. It also includes diamond sharpener. 10.75" Overall.
M-Tech Fixed Blade Combat Knife. Half Serrated Full Tang, 440 Stainless Steel Blade. Tanto Style, Black Color Handle with SPECIAL FORCES Medallion on The Handle. 9" Overall with Carrying Case.
These thin metal wallet cards can provide extensive information in an emergency situation. Typically, the front of the card will contain name, address, telephone, blood type and emergency contacts. The back will typically contain medical conditions, allergies and critical medications.
These are METAL cards, the same size as a normal business card - 2" x 3.5". They are made out of anodized aluminum, so they will hold up longer than your wallet. The laser engraving will appear white on the card. Under normal conditions, the engraving should last for many years. The cards can withstand temperature extremes and can get wet. Only physical abrasion will affect the quality of the engraving.
NOTE: This is a custom item that we outsource to another US company. Please allow a extra 2 weeks for delivery.
Carry these cards (especially when you travel) to protect yourself from unreasonable searches or questioning.
